Monthly Archives: December 2011

Community Tire and Automotive Service Specialists Maintenance Tips: The Belt Goes On

Posted on December 27, 2011 by tireaz


  />  

Today’s Community Tire and Automotive Service Specialists auto maintenance article focuses on your serpentine belt. Your serpentine belt is a long belt that’s driven by your engine. It winds around several accessories that power important automotive systems. Let’s go over them.

First, the serpentine belt drives your sedan air conditioning system. It spins the compressor that makes the cool air that takes the edge off the summer heat in Phoenix.

Next, the belt powers the alternator. The alternator creates electricity that’s used by your sedan’s electrical systems and also charges your car battery. Community Tire and Automotive Service Specialists Maintenance Tips The Belt Goes OnAll Phoenix drivers know that without the alternator, the battery will go dead in a few miles.

The serpentine belt may also run the pumps for both the power steering and power brakes. And, on many sedans, the serpentine belt powers the water pump. The water pump circulates coolant through the engine to keep it within normal operating temperatures as you drive around Phoenix.

Now on some sedans, the water pump is powered by the timing belt instead of the serpentine belt. So you can see the serpentine belt does a lot of work. And it if breaks, it affects a lot of systems. That’s why manufacturers and your service advisor at Community Tire and Automotive Service Specialists have recommended that it be changed every so often so that it doesn’t fail.

Your Phoenix service technician can perform a visual inspection of the belt to see if it has any cracks that signal the belt could fail soon and will measure the amount of belt material to make sure there is enough.

There’s a special, spring loaded pulley attached to the engine called the tensioner pulley. Its job is to make sure there’s a constant tension on the serpentine belt so that it doesn’t slip. The spring can become worn and no longer provide the necessary pressure to keep the belt tight. At Community Tire and Automotive Service Specialists, we recommend that the tensioner be replaced at the same time as the serpentine belt.

All in all, the serpentine belt’s an important part for the function of your sedan. And it’s not that expensive to replace in Phoenix – so it’s good to do so before it fails.

Share
Posted in Maintenance | Leave a comment

PCV Valve Service At Community Tire and Automotive Service Specialists In Phoenix

Posted on December 20, 2011 by tireaz


  />  

The PCV Valve is a little, inexpensive part that does a big job for Phoenix drivers. PCV stands for Positive Crankcase Ventilation.

The crankcase is the bottom area of the engine that holds the oil. When the sedan engine’s running, fuel is burned to generate power. Most of the exhaust from combustion goes out through the exhaust system. But some exhaust blows by the pistons and goes into the lower engine, or crankcase.

These hot gases are about seventy percent unburned fuel. PCV Valve Service At Community Tire and Automotive Service Specialists In PhoenixThis can dilute and contaminate the oil, leading to damaging engine oil sludge. It can also cause sedan engine corrosion, something we see occasionally at Community Tire and Automotive Service Specialists. At high speeds on Phoenix freeways, the pressure can build up to the point that gaskets and seals start to leak.

Back in the old days, engine makers simply installed a hose that vented these gases out into the atmosphere. But starting in the 1964 model year, laws mandated that these gases be recycled back into the air intake system to be mixed with fuel and burned in the sedan’s engine.

This is much better for the environment and it saves gas too. (Budget-conscious Phoenix drivers take note!) The little valve that controls all this action is the PCV valve. The PCV valve lets gases out of the engine, but won’t let anything back in. Over time, the vented gases will gum up the PCV valve and it won’t work well. That can lead to all of the problems I’ve already described, oil leaks, excessive oil consumption and wasted gas.

Fortunately, it’s very easy to test the PCV Valve at Community Tire and Automotive Service Specialists and quick and inexpensive to replace. Even so, it’s often overlooked because many Phoenix drivers don’t know about it. Check your sedan owner’s manual or ask your Community Tire and Automotive Service Specialists service advisor. If this is the first time you’ve heard of a PCV valve, you might be in line for a replacement.

There’s another aspect to the PCV system. In order for the valve to work correctly, it needs a little clean air to come in. This is done through a breather tube that gets some filtered air from the engine air filter. Now some vehicles have a small separate air filter for the breather tube called the breather element. That’ll need to be replaced at Community Tire and Automotive Service Specialists when it gets dirty.

Please ask your honest Phoenix service advisor about your PCV valve. For the price of a couple of burger combo meals in Phoenix, you can avoid some very expensive deep engine repairs.

Share
Posted in Parts | Leave a comment

Suspension Service At Community Tire and Automotive Service Specialists

Posted on December 13, 2011 by tireaz


  />  

Suspension systems will continue to operate effectively for many years and tens of thousands of miles. Eventually sedan components do wear out, but how long that takes depends a lot on how you drive in Glendale.

As you can imagine, if most of your driving is on smooth Arizona highways, your shock absorbers will last a lot longer than if you do most of your driving on bumpy roads or hauling heavy loads. In addition to just wearing out, sedan suspension components can be damaged in an accident or by a hard impact – like a pothole, hitting a curb or a rock in the road. Because the life span of shocks can vary so widely, your sedan manufacturer recommends periodic inspections.

Suspension Service At Community Tire and Automotive Service SpecialistsDuring an inspection at Community Tire and Automotive Service Specialists, your honest Glendale service technician will check for worn, broken or missing parts. Let me give a rundown of the major suspension components.

First there are the springs. The springs hold the weight of the vehicle. There are several kinds of springs. Springs are obviously heavy duty parts that rarely break or wear out. Shock absorbers work in conjunction with springs to smooth out the ride and help keep the tires on the road. The shocks are key to handling performance and ride comfort.

You’ve probably heard of struts. They combine a shock absorber and a coil spring in one unit. Shocks and struts will wear out over time. There are some signs that shocks or struts are wearing out. The tires may have a cupped wear pattern. This is from the shocks bouncing unevenly. You may notice a floaty or drifting sensation when cornering. If the front of your sedan dives excessively when stopping, or rocks back and forth after you stopped, your shocks may be worn out. And if they are leaking fluid, it’s definitely time to replace them.

If you are experiencing any of these symptoms, visit Community Tire and Automotive Service Specialists for a suspension inspection. Same if you’ve been in an accident that involved one of your wheels. If your sedan suspension actually fails, it could lead to a serious accident, so take care of these things.

When you replace your shocks, it’s usually a good idea to replace all four at the same time. That’ll give you more even handling. Talk with your Community Tire and Automotive Service Specialists service advisor because you don’t want a big difference between the performance of your shocks from wheel to wheel, and replacing all may be the safest bet.

There different grades of shocks and struts. You always want to use a replacement shock or strut that equals the one that came as original equipment when your sedan was new. But remember, they were designed to meet the expected needs of the broad range of Glendale people who buy that particular vehicle. Your needs may be more specialized.

For example if you want increased handling performance for your sedan, your honest Community Tire and Automotive Service Specialists advisor can recommend an upgraded shock or strut to give you what you want. If you haul heavy loads or trailers, you can get a more heavy duty shock absorber.

Share
Posted in Uncategorized | Leave a comment

Community Tire and Automotive Service Specialists Tire Safety: Washington vs. Lincoln

Posted on December 8, 2011 by tireaz


  />  

Welcome to the Community Tire and Automotive Service Specialists blog. Today, let’s talk about the effect of tire tread depth on braking. When talking about stopping power, most of us Chandler drivers tend to focus on our brakes. But our tires are where the rubber meets the road. So having good brakes isn’t enough. Safe Chandler drivers need to have tires with enough traction to translate braking power into stopping power.

Community Tire and Automotive Service Specialists Tire Safety Washington vs. LincolnLet’s focus on stopping in wet Chandler conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can’t move the water, the tire will actually ride on top of a thin film of water.

That’s called hydroplaning. If it’s really bad, Chandler drivers can actually spin out of control. At best, you won’t stop as fast.

So how does a tire move water? It has channels for water to flow through. Look at your sedan tire and you’ll see channels: channels that run around the tire and channels that flow across the tire. They’re designed to direct water away from the tire so it can contact the road better.

And the deeper the channel, the more water it can move. A brand new Community Tire and Automotive Service Specialists tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your sedan on wet Chandler roads.

So that’s why it’s so important to replace our sedan tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.

By comparison, you’ve probably seen the wear indicator that’s molded into tires. When tires are worn 3/32 of an inch, the tread wear bar is visible. So the recommended standard has twice the tread depth as a completely worn out sedan tire.

At Community Tire and Automotive Service Specialists, we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Chandler roads. A safe stop from Arizona freeway speeds with 4/32 of an inch of tread would result in a crash with worn out tires.

There’s an easy way to tell when a tire’s worn to 4/32 of an inch. Just insert a quarter into the tread. Put it in upside down. If the tread doesn’t cover George Washington’s hairline, it’s time to replace your sedan tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Many Chandler car owners have heard of this technique using a penny and Abe Lincoln’s head. That measure gives you 2/32 of an inch – half the suggested amount. Of course, sedan tires are a big ticket item. Most of us in Chandler want to get as many miles out of them as we can. But there’s a real safety trade-off. It’s your choice.

Share
Posted in Tires and Wheels | Leave a comment